The wet (water-soaked) grinding table is an industrial environmental dust removal equipment. It is commonly used for grinding and polishing operations of metals, stones, and hardware components.

I. Structural Characteristics

1. The equipment is an all-white cabinet with swivel wheels for easy mobility. It has multiple inspection doors (with black handles) on the surface. The side shows the water pump, valves, and the circulation water pipeline. The bottom is of the water storage box structure.

II. Working Principle

1. It uses water as the filtering medium. Through the circulating water curtain / spray system, it captures the dust generated during grinding. Coarse dust is directly washed by the water curtain and enters the water tank, while fine dust is settled in the water mist. At the same time, it can also suppress the grinding sparks and reduce the safety hazards caused by flammable and explosive dust.

III. Key Advantages

1. Compared with dry grinding tables, wet (water-based) grinding tables have higher dust removal efficiency, and are particularly suitable for processing work environments where sparks are likely to be generated or where there are flammable or explosive dusts.

2. There is no risk of secondary dust emission, which can significantly improve the working environment in the workshop and reduce the hazards of occupational diseases.

3. The equipment is equipped with a built-in water circulation system, which enables it to operate stably for a long time and has a relatively low maintenance cost.

IV. Common Application Scenarios

1. Industries such as hardware grinding, stone/ ceramic polishing, casting grinding, woodwork grinding, auto repair / mechanical processing, etc., are common environmental protection equipment used by many factories for dust control.